Clip-on VEET
The next-generation VEET instrument
Clip-on VEET · Visual Environment Evaluation Tool
Coming soon:
12 grams, 40% less bulk. Their own frames. The same VEET science.
A single-sided sensor module that clips onto the eyewear your participants already wear — full-day light, spectral, distance, and motion logging without a dedicated study frame.
What Clip-on VEET is
- 5-second sampling for more than 24 hours of continuous logging; 15-second sampling runs past 50 hours.
- Optional smart wear detection pauses logging off-face to stretch one charge across multiple days.
- Same sensing suite and configurability as VEET — existing study protocols carry straight over.
- Extended UV sensitivity from a scientific-grade fused-silica window transmitting below 300 nm.
Single-sided right mount, matte black, >40% lower bulk
15° down, 4° in.
Attaches to rigid temple arms, participant-supplied or study-issued — no dedicated SIXTY D frame required.
Designed to IP67; −10 °C to 37 °C, 95% RH non-condensing.
- ALS | Ambient light sensor (ams OSRAM TSL2585)
- PHO | Spectral light sensing (ams OSRAM AS7341)
- IMU | 6-axis inertial measurement unit (Bosch BMI270)
- TOF | Direct time-of-flight distance sensing(ams OSRAM TMF8828)
Why teams will want the Clip-on
One Module, Not two.
Dropping the duplicated second temple saves about 20 g — targeting under 12 g complete, roughly 30% of the mass of the VEET 2 pair.
Their frames, not ours.
Adapts to eyewear a participant already wears and likes — rigid temple arms, no dedicated study frame required.
Removeable mid-Study
Tool-free release. Comes off for sport, re-seats in the same spot
A note on pricing
- Clip-on VEET pricing is not yet final. We expect it to fall within the range of research-grade light-logging and actigraphy instruments, with volume pricing for multi-unit studies.
- One thing you can plan around: VEET software, data formats, and analysis tooling remain open and free. Your budget covers hardware.
- If you’re building a budget for a grant submission, tell us your unit count and timeline in the form below. We can provide an indicative per-unit figure and a letter you can cite in your proposal.
- Figures provided prior to availability are estimates for planning purposes and do not constitute an offer of sale.
Register your study’s interest
Tell us about your lab and how many units your study would need. We’ll follow up as Clip-on VEET moves toward availability.
Disclaimer:
The Clip-on VEET is designed for research; not clinical use at this time
Sensor hardware is shared with VEET 2; module-level specifications (mass, battery life, wireless, sampling) are not yet validated in production.
Frame compatibility: the Clip-on VEET will attach to most rigid frames with a rectangular temple arm cross section. Temple arms that are wireframe, circular or flexible are generally not compatible.